Monday, February 25, 2008

OSPF Network Types and Frame Relay

OSPF Network Types and Frame Relay (ardenpackeer.com)
Dynagen Simualtion...

Examples for:

  • OSPF Over Frame Relay
  • Non-Broadcast Network Type
  • Broadcast Network Type
  • Point-to-Multipoint Network Type
  • Point-to-Multipoint Non-Broadcast Network Type
  • Point-to-Point Network Type
  • Loopback Network Type

Related posts:
OSPF Network Types and Frame Relay Part 2
OSPF Network Types and Frame Relay Part 3
BGP allowas-in, BGP local-as tips and tricks…
Troubleshooting Split Horizon Issues, Part 2

Sunday, February 24, 2008

NAT Load-Balancing for Two ISP Connections (Cisco Systems)

IOS NAT Load-Balancing for Two ISP Connections (Cisco Systems)
This document describes a configuration for a Cisco IOS® router to connect a network to the Internet with Network Address Translation (NAT) through two ISP connections. The NAT of the Cisco IOS Software can distribute subsequent TCP connections and UDP sessions over multiple network connections, if equal-cost routes to a given destination are available.

-

IOS NAT Load-Balancing for Two ISP Connections (pdf)

NAT Load-Balancing with Optimized Edge Routing for Two Internet Connections (Cisco Systems)

IOS NAT Load-Balancing with Optimized Edge Routing for Two Internet Connections (Cisco Systems)
This document describes a configuration for a Cisco IOS® router to connect a network to the Internet with Network Address Translation through two ISP connections. The Cisco IOS Software Network Address Translation (NAT) can distribute subsequent TCP connections and UDP sessions over multiple network connections if equal-cost routes to a given destination are available. In the event that one of the connections becomes unusable, object-tracking, a component of Optimized Edge Routing (OER), can be used to deactivate the route until the connection becomes available again, which assures network availability in spite of instability or unreliability of an Internet connection.


...


IOS NAT Load-Balancing with Optimized Edge Routing for Two Internet Connections (pdf)

Configuring IPSec Router-to-Router, Pre-shared, NAT Overload Between Private Networks (Cisco Systems)

Configuring IPSec Router-to-Router, Pre-shared, NAT Overload Between Private Networks (Cisco Systems)
This sample configuration shows how to encrypt traffic between two private networks (10.50.50.x and 10.103.1.x) using IPSec. The networks know each other by their private addresses.


Configuring IPSec Router-to-Router, Pre-shared, NAT Overload Between Private Networks (pdf)

Configuring IPSec Router-to-Router, Pre-shared, NAT Overload Between a Private and a Public Network (Cisco Systems)

Configuring IPSec Router-to-Router, Pre-shared, NAT Overload Between a Private and a Public Network
(Cisco Systems)
This sample configuration shows how to encrypt traffic between a private network (10.103.1.x) and a public network (98.98.98.x) with the use of IPSec. The 98.98.98.x network knows the 10.103.1.x network by the private addresses. The 10.103.1.x network knows the 98.98.98.x network by the public addresses.


Configuring IPSec Router-to-Router, Pre-shared, NAT Overload Between a Private and a Public Network (pdf)

Configuring an IPSec Tunnel through a Firewall with NAT (Cisco Systems)

Configuring an IPSec Tunnel through a Firewall with NAT (Cisco Systems)
This document provides a sample configuration for an IPSec tunnel through a firewall that performs network address translation (NAT).

Configuring an IPSec Tunnel through a Firewall with NAT (pdf)

Configuring Dynamic Multipoint VPN Using GRE Over IPsec With OSPF, NAT, and Cisco IOS Firewall (Cisco Systems)

Configuring Dynamic Multipoint VPN Using GRE Over IPsec With OSPF, NAT, and Cisco IOS Firewall(Cisco Systems)
This document provides a sample configuration for Dynamic Multipoint VPN (DMVPN) using generic routing encapsulation (GRE) over IPsec with Open Shortest Path First (OSPF), Network Address Translation (NAT), and Cisco IOS® Firewall.

Configuring Dynamic Multipoint VPN Using GRE Over IPsec With OSPF, NAT, and Cisco IOS Firewall (pdf)
multipoint GRE (mGRE)

Using NAT in Overlapping Networks (Cisco Systems)

Using NAT in Overlapping Networks
This document demonstrates how you can use Network Address Translation (NAT) for overlapping networks. Overlapping networks result when you assign an IP address to a device on your network that is already legally owned and assigned to a different device on the Internet or outside network.

Using NAT in Overlapping Networks (pdf)

Network Address Translation (NAT) (Cisco Systems)

Network Address Translation (NAT) Support Page (Cisco Systems)

NAT Order of Operation (Cisco Systems)

Cisco - NAT Order of Operation
This document illustrates that the order in which transactions are processed using Network Address Translation (NAT) is based on whether a packet is going from the inside network to the outside network, or from the outside network to the inside network.

http://www.cisco.com/warp/public/556/5.pdf

In the table below, when NAT performs the global to local, or local to global, translation is different in each flow.
Inside-to-Outside:
If IPSec then check input access list
decryption - for CET (Cisco Encryption Technology) or IPSec
check input access list
check input rate limits
input accounting
policy routing
routing
redirect to web cache
NAT inside to outside (local to global translation)
crypto (check map and mark for encryption)
check output access list
inspect (Context-based Access Control (CBAC))
TCP intercept
encryption
Queueing


Outside-to-Inside:
If IPSec then check input access list
decryption - for CET or IPSec
check input access list
check input rate limits
input accounting
NAT outside to inside (global to local translation)
policy routing
routing
redirect to web cache
crypto (check map and mark for encryption)
check output access list
inspect CBAC
TCP intercept
encryption
Queueing